How to use Your Test Socket


Most people have test sockets embedded in their wiring, but not all of them know what their use is. It’s important to note that the test socket should help you monitor if there are any faults within the internal wiring of your house. You may not notice what’s wrong in your installation, but with the help of a test socket, you can point out the exact problem and have a Professional fix it before it becomes troublesome. If you are wondering if you have a test socket or not, check if your master socket has a removable faceplate. If it does, then you can be sure it has a test socket. 

If you are planning to get a test socket, make sure you do so from a reliable supplier such as tts, for the best quality and cost-effective solution. The following is a guideline on how to use it;

Unplug your devices

Before anything else, you have to unplug all telephones, faxes, PCs, modems, extension leads, and adaptors, among others. It’s essential to make sure everything is unplugged for enhanced safety and ensuring that nothing malfunctions.

Remove the faceplate in the master socket 

If your master socket has a faceplate, you can be sure it has a test socket, so proceed to unscrew it and pull it towards you carefully. Once it has been entirely removed, you can see the test socket on the right-hand side.

When testing your router plugin a microfilter into the test socket 

After removing the faceplate, you will be able to see the test socket. Use it to plug in your microfilter then proceed to plug your device like your router into the microfilter. 

If you notice that your devices are working well when you plug them to the test socket, then you should know that the problem is probably from your office or another area. Such situations should call for scrutinizing to see if there’s something wrong with the internal wiring. 

However, if none of your devices seems to work when you plug them into the test socket, then there’s a high possibility that the problem is within your local area. You can call in a professional to check it out for you or wait until the issue is resolved.

Avoid keeping devices connected to the test socket 

It’s not advisable to keep your devices connected because if you do, you end up disconnecting all the internal wiring in your office. That means you will have stopped all the other sockets from working. The only time you should have a device plugged in is if you are testing for a particular fault.

If you can’t detect any faults, then make sure you remove any device connected to the test socket and return the faceplate. Use a screwdriver to make sure the screws are well mounted. 

Comments are closed.