How To Clean a Firearm with a 22LR Solvent Trap?

If you have been using a 22LR firearm for a long time, you know how dirty it can be. It often seems like a shower of lead and residue accompanies every shot. This makes it even more critical to ensure you are following a good cleaning regimen.

By cleaning your firearm regularly with a good solvent trap, you can ensure that your firearm will last and prevent excess spillage and the accompanying mess while you do it. So, let’s take a look at how you can clean your firearm with a 22LR solvent trap.

How Does a Solvent Trap Help?

First off, why don’t we clear up what the solvent trap will do to help you clean your firearm? When you clean your 22LR firearm, chances are you will need to use a lot of solvents to clean out all of the residues these rounds leave behind.

Well, particularly with commonly used sprays, the solvent is going down the bore and straight out the other side, and you probably don’t want it going all over the room. A well-fitted 22LR solvent trap can create an airtight seal, catching all used solvents and keeping them from leaking out. This can help you quickly and easily clean your firearm, making it more likely that you will do it regularly.

How to Clean with a 22LR Solvent Trap

So, now that you have a 22LR solvent trap that fits nicely onto your firearm, how can you use it to clean? Just follow these steps.

1. Attach the solvent trap to your firearm. Generally, this will require using a thread adapter to attach the solvent trap to your firearm’s threads. Don’t forget to attach an end cap and then screw it onto the barrel.
2. Disassemble the firearm. Take the firearm apart as much as you need to clean it. This will vary depending on your model, but generally, manufacturer instructions will provide you a good idea.
3. Apply solvent to the barrel. Here, a lot will depend on how you apply your solvent, but with the solvent trap, you can safely apply as much as you need, whether by spraying, pouring, or soaking swabs and then pushing them with a jag. After applying the solvent, wait 10 to 15 minutes for the solvent to loosen the stuck-on material.
4. Use patches and brushes to clean. Alternate using a jag and patches soaked in solvent and then a bore cleaning brush to clean the bore’s interior thoroughly. For a heavily fouled firearm using 22LR rounds, this may take several rounds of alternating.
5. Use clean, dry patches to finish cleaning: Now, you can push clean, dry patches to finish cleaning.
6. Remove the Solvent Trap. Now you can check those final dry patches inside the solvent trap and judge whether or not to use a few more to finish cleaning.
7. Lubricate the barrel. Using a good oil or conditioner, apply a light coating to the inside of your barrel.
8. Clean and lubricate the action. Apply solvent to your brush and gently clean the action of your firearm. Wipe it dry, and then lightly lubricate any moving parts.
9. Reassemble and lubricate: Reassemble your firearm and gently wipe down the exterior with a light layer of lubricant.

To ensure your 22LR firearm functions when needed most, it is crucial to keep it clean. Using solvent is generally the best way to do this, and a 22LR solvent trap can make the process much easier and cleaner. This will make it far more likely you will keep up with a regular maintenance schedule. For a 22LR solvent trap that can make cleaning effortless, go to armoryden.com.