Tips For Choosing Camera For Industrial Machine Vision Needs

When you are setting up a machine vision system, your camera option will depend upon the needed speed, lighting and temperature, your environment area, and the product you desire to evaluate. Most of the time, industrial cameras act almost as close as typical cameras you would use, however, with some few differences along the way. There are several you need to consider if you’re planning to buy an industrial camera or line-scan camera for your manufacturer.

CMOS & CCD

If you are planning to obtain industrial cams, you might hear about CMOS and CCD. In CMOS cameras, the sensors are where the signal ended. It converted these signal lights. It makes the transfer of information fast. However, CMOS sensors are cheaper, and they are excellent when it comes to dynamic range. Since the CCD sensing units do not have electronic conversion devices on the sensor unit’s surface, they can provide higher colour fidelity and capture more light than its cheaper counterpart, the CMOS.

Size

The most preferred portable industrial camera dimension is no bigger than 30mm on each side. Hence, you can find most of today’s industrial and even line-scan cameras in a much smaller and compact size for portability. These cameras excel well in applications that have size restrictions. However, some may still require a different kind of structure.

FOV & Resolution

Today’s industry may demand more camera solutions to provide more or fewer details on their needs. The field of view (FOV) and the details would be based on the pixel and sensor size of the camera. The rule of thumb is; the bigger the pixel size, the more details would be captured, which goes with the sensor and FOV. As with most machine vision cameras, the sensor size largely depends on the FOV and its optics.

If you are looking for industrial cameras and embedded industrial PCs, visit Voltrium Systems for more product details.